Choose A Base Server
Available servers may be filtered by classification and/or options.
Intel S1200SPL E3 V5 Entry Tower Server Xeon - SATA (Tower)
Starting at only $1195.00
 

Mainboard: Intel S1200SPLR mATX
CPU: Intel Xeon E3 1200 v5 series LGA 1151 socket
RAM: 64GB max, 4 x DIMM, DDR4 2400MHz unbuffered DIMMS
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,5,10)
Expansion Slots: 1 x PCIe 3.0 x8 w/ x16 connector, 1 x PCIe 3.0 x8 w/ x8 connector, 1 x PCIe 3.0 x4 w/ x8 connector, 8 x SATA3
Case: Intel P4304 Tower w/ 365W 6.81"(W) x 21.5" (D) x 17.24" (H)
Drive Bays: 3 x Ext 5.25", 4 x 3.5" fixed or hot-swap hard drives
Peripheral Interfaces: 1 x VGA, 1 x Display Port, 1 x serial, 1 x, 2 x USB 3.0 and 2 x USB 2.0 on back panel, 2 x 1GB (RJ45) and 1 x 1GB dedicated server mgmt port (RJ45), 1 x M.2 connector, 1 x 2x4 pin connector for RMM4

Entry Level Intel Pedestal Chassis
RAM should be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator

Choose your case: Hot-swap or fixed SATA hard drives

Intel S1200SPL E3 V5 Tower Single Xeon 3.5 w/ red. power - SATA (Tower)
Starting at only $1515.00
 

Mainboard: Intel S1200SPLR mATX
CPU: Intel Xeon E3 1200 v5 series LGA 1151 socket
RAM: 64GB max, 4 x DIMM, DDR4 2400MHz unbuffered DIMMS
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,5,10)
Expansion Slots: 1 x PCIe 3.0 x8 w/ x16 connector, 1 x PCIe 3.0 x8 w/ x8 connector, 1 x PCIe 3.0 x4 w/ x8 connector, 8 x SATA3
Case: Intel P4000 Tower w/ 2 x 460W 6.81"(W) x 21.5" (D) x 17.24" (H)
Drive Bays: 3 x Ext 5.25", 4 x 3.5" hot-swap hard drive module default
Peripheral Interfaces: 1 x VGA, 1 x Display Port, 1 x serial, 1 x, 2 x USB 3.0 and 2 x USB 2.0 on back panel, 2 x 1GB (RJ45) and 1 x 1GB dedicated server mgmt port (RJ45), 1 x M.2 connector, 1 x 2x4 pin connector for RMM4

Premium Intel Pedestal Chassis Fixed or hot-swap (default) Hard Drives
Additional RAM should be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator

Integrated 4U Pedestal system including: (1) Intel Server Board S1200SPL , (4) 3.5" Hot Swap drive bays (default), backplane, 460W redundant power supplies, 2 x cooling fans, heat sink

Intel S1200V5RPL-HS Tower Server - ReadyTo Ship (Ready To Ship)
Starting at only $1249.00
 

Mainboard: Intel S1200VSPLR mATX
CPU: Intel Xeon E3 v5 1220 LGA 1150 socket
RAM: 32GB max, 4 x DIMM, DDR4 2133MHz unbuffered DIMMS
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,5,10)
Expansion Slots: 1 x PCIe 3.0 x4, 1 x PCIe 3.0 x8, 1 x PCIe 3.0 x16, 6 x SATA
Case: Intel P4304 Tower w/ 365W 6.81"(W) x 21.5" (D) x 17.24" (H)
Drive Bays: 3 x Ext 5.25", 4 x 3.5" hot-swap hard drives
Peripheral Interfaces: 1 x VGA, 1 x serial, 1 x, 2 x USB, 2 x RJ45

NEW! - Ready To Ship Server (hot-swap hard drives)
Free Install w/ Operating System purchase!
Intel Xeon E3v5 1220, 16GB DDR4 2133 RAM, 2 x 1TB SATA RAID 1 (mirrored) Hard Drives, 24X DVDRW

Entry Level Intel Pedestal Chassis (standard) or 4U Rackmount (w/ addition of rack conversion kit)
Additional RAM should be installed in matched pairs
Some hardware add-ons and Small Business Server loads may add production time. Server may not ship until next day. Contact your sales rep for details

Hot-swap SATA hard drives

Intel S2600CW2 4U Tower/Rack Dual Xeon (4U Tower/Rackmount)
Starting at only $2297.00
 

Mainboard: Intel S2600CW2 SSI EEB 12" x 13" Socket R
CPU: Intel Xeon E5-2600 v4 series
RAM: 16 x DIMM, max. 1TB, DDR4 2400 MHz ECC FBDIMMs
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,10), IPMI 2.0
Expansion Slots: 1 x PCIe x8, 4 x PCIe x16, 1 x PCIe x4, 10 x SATA
Case: Intel 4U Pedstal w/ 2 x 750W
6.81"(W) x 24.9" (D) x 17.24" (H)
Drive Bays: 4 x 3.5" hot-swap hard drives via FUP4X35S3HSDK drive bay module (included)Max = 2
Peripheral Interfaces: 1 x VGA, 1 x serial, 7 x USB, 4 x RJ45

Premium Intel Pedestal Chassis (standard) or 4U Rackmount (w/ addition of rack conversion kit) Hotswap Hard Drives
Additional RAM should be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator
If installing additional cpu you must install additional RAM (1 matched pair per cpu)

Default 4U Pedestal system includes: (1) Intel Server Board S2600CW2 , (4) 3.5" Hot-Swap Drive Carriers (8 max), Redundant Cooling, (1) Tower Passive Heat Sink

750W Common Redundant Power Supply (Platinum Efficiency)

Intel S2600STB 4U Tower/Rack Dual Xeon (4U Tower/Rackmount)
Starting at only $2505.00
 

Mainboard: Intel S2600STB SSI EEB 12" x 13" Socket R
CPU: Intel Xeon Scalable Processors
RAM: 16 x DIMM, max. 1TB, DDR4 2400 MHz ECC FBDIMMs
Integrated: Video, 2 x 10GBase-T LAN, RAID (0,1,10), IPMI 2.0
Expansion Slots: 3 x PCIe x8, 3 x PCIe x16, 12 x SATA
Case: Intel 4U Pedstal w/ 2 x 750W
6.81"(W) x 24.9" (D) x 17.24" (H)
Drive Bays: 4 x 3.5" hot-swap hard drives via FUP4X35S3HSDK drive bay module (included)Max = 2
Peripheral Interfaces: 1 x VGA, 1 x serial, 2 x USB 3.0, 2 x USB 2.0, 1 x USB Type A connector, 2 x RJ45

Premium Intel Pedestal Chassis (standard) or 4U Rackmount (w/ addition of rack conversion kit) Hotswap Hard Drives
Additional RAM should be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator
If installing additional cpu you must install additional RAM (1 matched pair per cpu)

Default 4U Pedestal system includes: (1) Intel Server Board S2600STB , (4) 3.5" Hot-Swap Drive Carriers (8 max), Redundant Cooling, (1) Tower Passive Heat Sink

750W Common Redundant Power Supply (Platinum Efficiency)

Intel E5-2308WTTYS 2U Rack Dual Xeon 3.5 (2U SATA Rackmount)
Starting at only $2858.00
 

Mainboard: Intel S2600WTT Custom 16.5" x 16.5" Socket R
CPU: Intel Xeon E5 v4 series
RAM: 24 x DIMM, max. 3072GB, DDR4 2400MHz ECC FBDIMMs
Integrated: Video, 2 x 10-Gigabit LAN, IPMI 2.0
Expansion Slots: 1 x PCIe x4 Gen3, 7 x PCIe x8 Gen 3, 1 x PCIe x4 Gen 2, 10 x SATA
Case: Intel 2U rackmount w/ 2 x 1000W 16.93"(W) x 27.95" (D) x 3.44" (H)
Drive Bays: 8 x 3.5" hot-swap hard drives
Peripheral Interfaces: 1 x VGA, 2 x serial, 1 x, 10 x USB, 4 x RJ45

Premium Intel 2U Rackmount w/ Hotswap Hard Drives
Additional RAM must be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator
If installing additional cpu you must install additional RAM (1 matched pair per cpu)

Integrated 2U rackmount system including: (1) Intel Server Board S2600WTT, (8) 3.5" Hot-Swap Drive Carriers, 1 x front VGA & 2 x USB on a dedicated tray , (2) CPU Heat Sinks, (1) airduct, (2) risers, Redundant & Hot-swap Cooling Fans
(1) 1000W Common Redundant Power Supply (Platinum Efficiency) Default configuration contains 2nd power supply for full redundancy

Intel E5-R2312WTTYS 2U Rack Dual Xeon 3.5 (2U SATA Rackmount)
Starting at only $3060.00
 

Mainboard: Intel S2600WTT Custom 16.5" x 16.5" Socket R
CPU: Intel Xeon E5 v3 series
RAM: 24 x DIMM, max. 3072GB, DDR4 2400MHz ECC FBDIMMs
Integrated: Video, 2 x 10-Gigabit LAN, IPMI 2.0
Expansion Slots: 1 x PCIe x4 Gen3, 6 x PCIe x8 Gen 3, 10 x SATA
Case: Intel 2U rackmount w/ 2 x 1000W 16.93"(W) x 27.95" (D) x 3.44" (H)
Drive Bays: 12 x 3.5" hot-swap hard drives
Peripheral Interfaces: 1 x VGA, 2 x serial, 1 x, 10 x USB, 4 x RJ45

Premium Intel 2U Rackmount w/ Hotswap Hard Drives
Additional RAM must be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator
If installing additional cpu you must install additional RAM (1 matched pair per cpu)

Integrated 2U rackmount system including: (1) Intel Server Board S2600WTT, (12) 3.5" Hot-Swap Drive Carriers, 1 x front VGA & 2 x USB on a dedicated tray , (2) CPU Heat Sinks, (1) airduct, (2) risers, Redundant & Hot-swap Cooling Fans
(1) 1000W Common Redundant Power Supply (Platinum Efficiency) Default configuration contains 2nd power supply for full redundancy

Intel R1304SPOSHBN 1U Server Xeon SAS (1U SAS Rackmount)
Starting at only $1295.00
 

Mainboard: Intel S1200V3SPO microATX
CPU: Intel Xeon E3 1200v5 series LGA 1151 socket
RAM: 64GB max, 4 x DIMM, DDR4 2400 unbuffered DIMMS
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,5,10), IPMI 2.0, backplane
Optional: Intel Remote Management Module 4 or Intel RMM 4 Lite
Expansion Slots: 1 x PCIe 3.0 x8 w/ x16 connector, 8 x SATA 3.0 Gb/s ports
Case: Intel R1304SPOSHOR 1U w/ 350W non redundant power supply 17.26"(W) x 23.84" (D) x 1.7" (H)
Drive Bays: 4 x 3.5" SATA hot-swap hard drives, 1 x slim-line optical drive bay
Peripheral Interfaces: 1 x VGA, 1 x serial, 2 x USB 3.0 and 2 x USB 2.0 ports on back panel, 2 x 1GB RJ45 and 1 x 1GB dedicated server mgmt port

1 x full height riser with x16 connector, 1 x TPM 1.2 module, 1 x M.2 connector

RAM should be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator

Hot-swap hard drives
If selecting RAID module use cable in Controller Cards 2. If selecting RAID card use cable in Accessories 2.

Intel R1304SPOSHOR 1U Xeon w/ red. power - SAS (1U SAS Rackmount)
Starting at only $1995.00
 

Mainboard: Intel S1200V3SPO microATX
CPU: Intel Xeon E3 1200v5 series LGA 1151 socket
RAM: 64GB max, 4 x DIMM, DDR4 2400 unbuffered DIMMS
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,5,10), IPMI 2.0, backplane
Optional: Intel Remote Management Module 4 or Intel RMM 4 Lite
Expansion Slots: 1 x PCIe 3.0 x8 w/ x16 connector, 8 x SATA 3.0 Gb/s ports
Case: Intel R1304SPOSHOR 1U w/ 450W redundant power supplies 17.26"(W) x 23.84" (D) x 1.7" (H)
Drive Bays: 4 x 3.5" SATA hot-swap hard drives, 1 x slim-line optical drive bay
Peripheral Interfaces: 1 x VGA, 1 x serial, 2 x USB 3.0 and 2 x USB 2.0 ports on back panel, 2 x 1GB RJ45 and 1 x 1GB dedicated server mgmt port

1 x full height riser with x16 connector, 1 x TPM 1.2 module, 1 x M.2 connector

RAM should be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator

Hot-swap hard drives

Intel E5-R1304WT2GS 1U Rack Dual Xeon (1U SATA Rackmount )
Starting at only $2314.00
 

Mainboard: Intel S2600WT2 Custom 16.7" x 17" Socket R3
CPU: Intel Xeon E5 v4 series
RAM: 24 x DIMM, max. 3072GB, DDR4 2400MHz ECC FBDIMMs
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,10), IPMI 2.0
Expansion Slots: 2 x PCIe x16 3.0, 1 x x8 3.0, 1 x PCIe x4 3.0, 10 x SATA
Case: Intel 1U rackmount w/ 1 x 750W - 1 additional power supply included for redundancy (default)16.93"(W) x 27.95" (D) x 1.72" (H)
Drive Bays: 4 x 3.5" hot-swap hard drives
Peripheral Interfaces: 1 x VGA, 2 x serial, 8 x USB, 2 x RJ45

Premium Intel 1U Rackmount w/ Hotswap Hard Drives
Additional RAM must be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator
If installing additional cpu you must install additional RAM (1 matched pair per cpu)

Integrated 1U rackmount system including: (1) Intel Server Board S2600WT2 , (4) 3.5" Hot-Swap Drive Carriers, (1) front VGA, (2) CPU Heat Sinks, (2) risers
(1) 750W Common Redundant Power Supply (Platinum Efficiency) - 1 additional power supply required for redundancy

Intel R1304SPOSHBN 1U Server Xeon SATA (1U SATA Rackmount )
Starting at only $1247.00
 

Mainboard: Intel S1200V3SPO microATX
CPU: Intel Xeon E3 1200v5 series LGA 1151 socket
RAM: 64GB max, 4 x DIMM, DDR4 2400 unbuffered DIMMS
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,5,10), IPMI 2.0, backplane
Optional: Intel Remote Management Module 4 or Intel RMM 4 Lite
Expansion Slots: 1 x PCIe 3.0 x8 w/ x16 connector, 8 x SATA 3.0 Gb/s ports
Case: Intel R1304SPOSHOR 1U w/ 350W non redundant power supply 17.26"(W) x 23.84" (D) x 1.7" (H)
Drive Bays: 4 x 3.5" SATA hot-swap hard drives, 1 x slim-line optical drive bay
Peripheral Interfaces: 1 x VGA, 1 x serial, 2 x USB 3.0 and 2 x USB 2.0 ports on back panel, 2 x 1GB RJ45 and 1 x 1GB dedicated server mgmt port

1 x full height riser with x16 connector, 1 x TPM 1.2 module, 1 x M.2 connector

RAM should be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator

Hot-swap hard drives

Intel R1304SPOSHOR 1U Xeon w/ red. power - SATA (1U SATA Rackmount )
Starting at only $1545.00
 

Mainboard: Intel S1200V3SPO microATX
CPU: Intel Xeon E3 1200v5 series LGA 1151 socket
RAM: 64GB max, 4 x DIMM, DDR4 2400 unbuffered DIMMS
Integrated: Video, 2 x Gigabit LAN, RAID (0,1,5,10), IPMI 2.0, backplane
Optional: Intel Remote Management Module 4 or Intel RMM 4 Lite
Expansion Slots: 1 x PCIe 3.0 x8 w/ x16 connector, 8 x SATA 3.0 Gb/s ports
Case: Intel R1304SPOSHOR 1U w/ 450W redundant power supplies 17.26"(W) x 23.84" (D) x 1.7" (H)
Drive Bays: 4 x 3.5" SATA hot-swap hard drives, 1 x slim-line optical drive bay
Peripheral Interfaces: 1 x VGA, 1 x serial, 2 x USB 3.0 and 2 x USB 2.0 ports on back panel, 2 x 1GB RJ45 and 1 x 1GB dedicated server mgmt port

1 x full height riser with x16 connector, 1 x TPM 1.2 module, 1 x M.2 connector

RAM should be installed in matched pairs
Contact your sales rep to add hardware not offered in this configurator

Hot-swap hard drives